bcmaxx
NAXJA Forum User
- Location
- The West Kootenays,B.C. Canada
I had a longer travel front shaft made for my heep, and turns out my coast driveline shaft in the back is toast (long story) , so I'm thinking of re-purposing the front to the rear. at static its at 31" even , compressed 28.5" and extended 32" (is max leaving the width of the spline as engaged) so is 1" of extension enough? its flanged on both ends so I can add a flange driveline spacer . what you think. The guys who built it say 2" travel in and out is plenty, so 1" is fine.