Kejtar said:
I pulled up with my 99 to the dealership about 2 weeks ago to check on the recalls. They pulled them up by the vin and proudly announced that they will relocate my airbag module for me.
That's the 2-door, right? There ya go. I met a dude with an 01 a couple months ago... like right after I found out about that site... we put his vin in there, and it had no recall. No bracket under the driver seat either. <shrug> Its Jeep... YMMV
Kejtar said:
I remember helping folks fit them between the years and don't remember having to cut and weld anything, but then again they might have had a weird variation during one of the years.
Yeah, on the early ones, the bolts go through the bracket top and bottom, on the late one, top and front, IIRC. I guess you could redrill/relocate goofy nut-things but looking at it, it just seemed easier to plasma off one, weld the other back on... no measuring or drilling of anything.
Kejtar said:
I'm trying to remember the details but they elude me.
Heh, me too. I know about your bulb crusade... from what I've seen when searching, it really seems to be a personal thing. Almost like a witch hunt to get the devils outta the switch. It seems there are two main camps- 1) the bulbs in the switch itself make it overheat 2) there is no relay to relay power to the fogs, sending full power through the switch. I'm not so fond of the first one, because if that were the case, there would be more burned out rear defrost switches too. Sure its got merit- that stupid thing does get really hot when they run for a while.
I don't use my fogs all the time... so I'm probably not a good gauge. I use my fogs when its foggy... which around here is much less than other places. So far my redneck switch mod is working, and I'll add a relay to that... and I might never know if that really did it, or if it was just cause I don't use them anytime its dark.
OH, Remi, when I started messing with the fog switch, I checked Riverside Jeep for that retrofit harness and while they didn't have one, Moss Dodge down the street had it in stock. I was meaning to go down there and look at it, but never did.