Paintballpsyco2369
NAXJA Forum User
- Location
- Memphis, Mi
Hello all, I have been doing some digging on this and thought I had it all figured out. I read through as many writeups I could on using the YJ brackets to relocate the alternator and up until yesterday when I was pulling parts off my engine, I ran into a tiny issue... I have the lower ZJ bracket, removed my compressor and its bracket and the whole fan assembly, but found my compressor to have 2 through bolts on the bracket instead of the 4 top down bolts all the writeups use... I guess I never gave a thought it being a Renix and possibly being different on that bracket...
So here is what I am wondering, Can I just use an older YJ compressor bracket to do this, or will I be stuck having to swap out my compressor? If it comes to that, I may just go ahead and keep the mechanical fan for now and leave the alternator alone and figure something out later... Thanks for the help once again, I truly do appreciate it.
Paint
So here is what I am wondering, Can I just use an older YJ compressor bracket to do this, or will I be stuck having to swap out my compressor? If it comes to that, I may just go ahead and keep the mechanical fan for now and leave the alternator alone and figure something out later... Thanks for the help once again, I truly do appreciate it.
Paint