Pig Gig Swap Meet

[HaleYes]

John's tow hooks are SOLD!
John, you sold them to Rick.......a local guy.

 

[XJosh95]

if this will fit an 03 Chevy 3/4 ton gas burner, I will take it.

Follow up: I just cross referenced it and it will fit, so I will take it for sure. Just bring it along with ya to the Pig Gig.

Thanks.

Cheeseman-OUT!

You got it, Cheeseman! It's dirty so it'll need recharged, but it's cheap...See you in a couple weeks.

 

[XJ&CHZ4ME]

10-4, looking forward to it :thumbup:

 

[FlexdXJ]

I'll take 'em. What are you looking for, parts wise?

I have an older RC adjustable track bar, needs new TRE.

Upgraded RC adj. track bar with heim attached to factory bracket.

Factory tow hooks and brackets.

D35 C-clip axle shafts.

stock steering assembly.

2 pair RE 1.5" tapered blocks, 1 new, 1 rusty.

And my old 35" X-terrains.

Are the TRE's on that stock steering good(mainly the drag link ones)? Mine are kinda shot. How much lift is that upgraded RC track bar good for? I need one to get mine finished up and don't want one with a TRE. 35's are a bit too much for me to haul back from Illinois since I will have all my junk that I'm getting plus Tess' junk too! PM sent John.

 

[lesslimited]

Are the TRE's on that stock steering good(mainly the drag link ones)? Mine are kinda shot. How much lift is that upgraded RC track bar good for? I need one to get mine finished up and don't want one with a TRE. 35's are a bit too much for me to haul back from Illinois since I will have all my junk that I'm getting plus Tess' junk too! PM sent John.

The TRE's are pretty good.

RC doesn't sell that model track bar anymore, but the new one with the bracket is for 4-6". I had this one adjusted as short as it would go for Cindy's 4" lift. It worked fine, I just found good deals on the TNT bar and bracket, before RC came out with their new one.

Options would be to drill the axle bracket then move back to the original holes when you go higher, or cut the bar a little if the threaded portion is deep enough. Or cut and sleeve the straight portion of the bar. Or maybe it would be close enough as is?

 

[XJosh95]

Ok, so what I still have not spoken for and recently added to the list...

I have the Dana 205 T-Case. Divorced, twin sticks. I don't know of the ratios, but it is what it is. $250 obo.

I have a passenger side headlight bucket for a 84-96 XJ. It's the two piece if that changes the years at all? I don't know what they regularly go for, $10?

I have a working dummy light cluster, 91-95? the odo doesn't work, but the lights, gas gauge and speedo do. $10.

I know Brad (GoSlowGetStuck) has a cluster for a Renix set up. Full cluster and gauges.

That's about all I can think of...PM me for any other questions.

 

[AshyLarry]

Anyone have a 35" tire that would be good for a spare, on a 15" rim?

Would also be looking for D30 parts (locker, gears, axles) and either an 8.8 or D44.

 

[XJ&CHZ4ME]

I have a 36 spare w/o a rim for free :dunno:

 

[1995sport]

The TRE's are pretty good.

RC doesn't sell that model track bar anymore, but the new one with the bracket is for 4-6". I had this one adjusted as short as it would go for Cindy's 4" lift. It worked fine, I just found good deals on the TNT bar and bracket, before RC came out with their new one.

how much for the newer trackbar with the bracket? will you ship it?

 

[Prepmech]

PM me for pricing

Rough Country Stuff:
XJ sliders
Wheel spacers

Mile Marker SEC9500 winch

Mickey Thompson 33x12.50R15 MTZs on 15x8 Classic Locks

dana 30 rock ring differential cover

Hi-Lift 4xRac

AK47, Tapco folding stock set, 80rd drum magazine, 30rd mag, tons of ammo

Also have:

'05-09 F250 2" leveling kit

94-01 Dodge 1500/2500 2.5" leveling kit

07-09 Chevy 1500 1.5" leveling kit

02-06 Chevy HD leveling kit

99-06 Chevy1500 2" lift kit

04-08 F150 2.5" lift kit

2 sets of Warn 1/2 ton premium hubs

Except for the rifle, all items are new.

 

[MXJ]

If anyone is interested in what I have I will for sure be at the Pig Gig.

Dodge 727, 0 miles on rebuild (have receipt), fits smallblock patterns.
$450

Dodge NP208 transfercase. gone through and is in good working order.
$50

C4x4 fab towhook brackets, no hooks.
$25

Chevy TBI fuel injection kit. Uses AFI harness, chip and pump, have 305 and 350 injectors, chip has lifetime re-programing.
$600

RCI 2161A fuel cell.
$150

Chryco 8.25 carrier w/spiders 29 spline.
make an offer

Dana 30 bare carrier, 4:10 and down.
Make an offer

(4) American Racing Outlaw wheels, painted black. Unsure of backspacing. will know by the weekend.
$150

(1) American Racing black steel wheel. unsure of backspacing.
$25

I'll have more stuff to post when I'm home this weekend.

 

[FlexdXJ]

If anyone is interested in what I have I will for sure be at the Pig Gig.

Dodge 727, 0 miles on rebuild (have receipt), fits smallblock patterns.
$450

Dodge NP208 transfercase. gone through and is in good working order.
$50

C4x4 fab towhook brackets, no hooks.
$25

Chevy TBI fuel injection kit. Uses AFI harness, chip and pump, have 305 and 350 injectors, chip has lifetime re-programing.
$600

RCI 2161A fuel cell.
$150

Chryco 8.25 carrier w/spiders 29 spline.
make an offer

Dana 30 bare carrier, 4:10 and down.
Make an offer

(4) American Racing Outlaw wheels, painted black. Unsure of backspacing. will know by the weekend.
$150

(1) American Racing black steel wheel. unsure of backspacing.
$25

I'll have more stuff to post when I'm home this weekend.

I bet ya XJosh95 would be interested in those THB's. I PM'd him about it!

 

[XJosh95]

I bet ya XJosh95 would be interested in those THB's. I PM'd him about it!

Indeed!

 

[XJosh95]

If anyone is interested in what I have I will for sure be at the Pig Gig.

Dodge 727, 0 miles on rebuild (have receipt), fits smallblock patterns.
$450

Dodge NP208 transfercase. gone through and is in good working order.
$50

C4x4 fab towhook brackets, no hooks.
$25

Chevy TBI fuel injection kit. Uses AFI harness, chip and pump, have 305 and 350 injectors, chip has lifetime re-programing.
$600

RCI 2161A fuel cell.
$150

Chryco 8.25 carrier w/spiders 29 spline.
make an offer

Dana 30 bare carrier, 4:10 and down.
Make an offer

(4) American Racing Outlaw wheels, painted black. Unsure of backspacing. will know by the weekend.
$150

(1) American Racing black steel wheel. unsure of backspacing.
$25

I'll have more stuff to post when I'm home this weekend.

PM'd on THBs!

 

[Prepmech]

Dana 30 rock ring sold.

Adding to the for sale/trade list:

HPI Savage 25 Nitro RC truck, tons of hop-up and spare parts

 

[MXJ]

Dana 30 rock ring sold.

Adding to the for sale/trade list:

HPI Savage 25 Nitro RC truck, tons of hop-up and spare parts

Test-drives?

 

[ILLXJ]

Rear seat back with headrest.

Will be painted & have foam & cover installed. $25

Rock rail legs--just add outer tube

$15

Yamaha PW80

Needs a seat cover & chain & sprockets. Rideable as is. $150

JIM.

 

[XJ&CHZ4ME]

JIM, I might have some interest in the PW80. Is it at the farm so I can take a look at it at the Pig Gig?

 

[Prepmech]

My brother has a '95 Yamaha G14 gas powered golf cart that needs to disappear. It is white with a bed on the back, lift kit, and fourwheeler tires on black aluminum wheels. It is a pretty sweet ride, as far as golf carts go. $2800.00

 

[XJosh95]

Rear seat back with headrest.

Will be painted & have foam & cover installed. $25

Rock rail legs--just add outer tube

$15

Yamaha PW80

Needs a seat cover & chain & sprockets. Rideable as is. $150

JIM.

Should I be needing those rock rail legs for the sliders I'm getting from you? If so, I'll take 'em as I have no hardware to install.