Okay, my situation is that I have post lift vibrations. A 3" Rough Country Series II lift with netted after settling about 3+". My problem is I am getting vibrations at 30-35mph and then again at about 55mph and up. It does settle down when I'm not on the throttle but, doesn't disappear. I just checked my track bar and the ball joint end when pushing up and down on it is definitely shot. I also have a little play in the steering.
So, here is what I have been told so far. I have been told that the trac bar can cause this and also maybe be the tierod ends. I have also been told that a Transfer case drop will solve this as well.
My question is, can it be all the above and/or just the trac bar which I know is shot?
Help please. Any and all advice is greatly appreciated.
Wayne
So, here is what I have been told so far. I have been told that the trac bar can cause this and also maybe be the tierod ends. I have also been told that a Transfer case drop will solve this as well.
My question is, can it be all the above and/or just the trac bar which I know is shot?
Help please. Any and all advice is greatly appreciated.
Wayne