Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to the new NAXJA Forum!
If your password does not work, please use "Forgot your password?" link on the log-in page.
Please feel free to reach out to [email protected] if we can provide any assistance.
The best jackstand points on the chassis are as follows:
FRONT--right behind where the lower control arm bracket is welded to the "frame" rail
REAR--inboard of where the front spring hanger bracket is welded to the "frame" rail
The best jackstand points on the chassis are as follows:
FRONT--right behind where the lower control arm bracket is welded to the "frame" rail
REAR--inboard of where the front spring hanger bracket is welded to the "frame" rail
What XJ-Unlimited is correct. I was assuming you were looking for the "jack points" on the chassis. If you are placing jackstands on the axles, as far out on the tubes as you can get will be best.