Peregrine
NAXJA Forum User
- Location
- Highlands Ranch
I am narrowing my steering slop problem. Everything is tight under the rig. I have concluded that the problem lies in my steering shaft or in the column. When pulling on the steering shaft, I can hear the upper u-joint (near the firewall) making a slight rattle. When turning the wheel to lock at full stop...it creakes up there near that same ujoint or seal up on the firewall.
I am thinking of swapping in a newer shaft. I would hate to fork over $250 for a new Borgensen shaft when this may not be the whole problem. Plus I am dead broke! I want to put a late model one in, as it should have less miles than one from my era of XJ.
Does anyone know if it will fit? When researching these OEM parts...I only see available for years 84-94. I have a '92 XJ. Sounds like from this information...it may not work. Any ideas/suggestion? Thank!
-Scott
I am thinking of swapping in a newer shaft. I would hate to fork over $250 for a new Borgensen shaft when this may not be the whole problem. Plus I am dead broke! I want to put a late model one in, as it should have less miles than one from my era of XJ.
Does anyone know if it will fit? When researching these OEM parts...I only see available for years 84-94. I have a '92 XJ. Sounds like from this information...it may not work. Any ideas/suggestion? Thank!
-Scott
Last edited: