Shawninsicily
NAXJA Forum User
- Location
- Sicily
Hello, I am hoping to get help with some measurements. I have an '89 with the (failed)POS Bendix brakes, and plan on replacing the master cylinder/booster/proportioning valve with one from a '96. While I'm at it, I'm going to relocate my IATS to the airtube, which will free up a hole in the intake manifold to supply the vacuum. Since I'm stationed in sicily, it's hard for me to just drive down to the parts store and make a comparison. Everything must be ordered online. My questions are these:
What size and thread are the outlet holes in the proportioning valve of a '96? Both of the front are the same, the rear looks smaller.
What size and thread is the IATS on an '86? Hopefully somebody can help me out here, as both of these mods seem pretty common. Thanks for your time.
What size and thread are the outlet holes in the proportioning valve of a '96? Both of the front are the same, the rear looks smaller.
What size and thread is the IATS on an '86? Hopefully somebody can help me out here, as both of these mods seem pretty common. Thanks for your time.
