CDUNN2448
NAXJA Forum User
- Location
- Northern Indiana
Hi guys, so I just recently got a axle truss (artec industries) installed on my front Dana 30 axle and I also got Johnny Joints for it. I'm having issues with where the upper control arm on the passenger side bolts on top of the axle. It bolts up but I noticed that the bottom part of the control arm is touching the top plate on the truss which is putting a lot of pressure on my johnny joint and popping the snap ring out. I was wondering if anyone else has had this issue or what I should do about it to fix it. My jeep is a 2000 Cherokee with 4.5 inch rough country long arm lift. Thanks for any advice or help