I have a 98 Jeep Cherokee 2 door that I Purchased off Mark (Sidewaysstarion) least year. Lost interest in building a cherokee. My loss is your gain. It needs shocks and driveshafts to make it driveable. It’ll will need the transfer case linkage to be reinstalled. All suspension parts have 0 miles on them.
4.0L/AW4/NP231
Parts
-4.5” Rubicon Express Leaves and Rubicon Express 5.5” Coils
-Rubicon express extended shackles
- Stinky Fab 3 link long arm crossmember
- used 2” .250 wall DOM for lower links with 1.25” heims from ruffstuff specialties
- upper is 1.75” with a 7/8 Ruffstuff heim at the frame and a Currie flex joint at the diff casting mount side
-Rubicon Express HD double sheer track bar with Matching frame side bracket
-17” Rubicon wheels, I have some 34” ATS I’m throwing in
-upgraded headlights and housings and wire loom
-NP231 with TeraFlex super short SYe installed
-Banks Exhaust Manifold Installed and heat wrapped
Mark put a ton of work into to get it running and I’m sure he would chime in to back this up. The Jeep ran great when I parked it, I go out and fire it up every once in a while. Passed smog last year with flying colors. Tags are due and are $120. I’ve installed a new water pump and AC Compressor since I’ve had it. The interior is dirty. I have spare seats for front and back that I will throw in the deal. The Jeep will need a paint job due to the fenders/ passenger door and hood being different colors. I figured someone starting out might enjoy this build.
I’m asking $2800
Text or call for pics (6two6) 217-623zero
4.0L/AW4/NP231
Parts
-4.5” Rubicon Express Leaves and Rubicon Express 5.5” Coils
-Rubicon express extended shackles
- Stinky Fab 3 link long arm crossmember
- used 2” .250 wall DOM for lower links with 1.25” heims from ruffstuff specialties
- upper is 1.75” with a 7/8 Ruffstuff heim at the frame and a Currie flex joint at the diff casting mount side
-Rubicon Express HD double sheer track bar with Matching frame side bracket
-17” Rubicon wheels, I have some 34” ATS I’m throwing in
-upgraded headlights and housings and wire loom
-NP231 with TeraFlex super short SYe installed
-Banks Exhaust Manifold Installed and heat wrapped
Mark put a ton of work into to get it running and I’m sure he would chime in to back this up. The Jeep ran great when I parked it, I go out and fire it up every once in a while. Passed smog last year with flying colors. Tags are due and are $120. I’ve installed a new water pump and AC Compressor since I’ve had it. The interior is dirty. I have spare seats for front and back that I will throw in the deal. The Jeep will need a paint job due to the fenders/ passenger door and hood being different colors. I figured someone starting out might enjoy this build.
I’m asking $2800
Text or call for pics (6two6) 217-623zero