Search results

My main problem is intermittent, but when coming to a stop it stutters through second gear. When in 1st there is no issues, and 3rd/od no real issues. On acceleration it sometimes is sluggish through second gear. If I'm trying to cruise in second it will sometimes shack and buck. I...

I got a new bumper with a steering box brace, and when installing ran into the problem of not being able to get the bolts back through into the steering box. Any suggestions, on how to get the bolts to line up?

As soon as I tried to start I got a click and all power is gone. No radio, no power locks, nothing. I checked connection on battery (Optima Red top about 3 years old), and banged on starter (rebuilt last fall). After this I got my key to buzz with the door open for about a second then nothing.

I got a set of 235/75R15 Maxxis Buckshot Mudders today on my 15x8 Ravine Rims(5.5 BS), and I was wondering what P.S.I. I should run them at(guessing about 30, but the shop said 40 even though the site says max P.S.I. is 35)? I was also wondering what I could air down to on the trail. Thanks!

I bought a set of Bosch spark plug wires (17MM) and found that one of them would not go on the spark plug (it's the wire because I checked it on another plug). I went back to the store and got a new plug wire, and didn't realize til I got home that it was an 18MM. I am curious if it would cause...

I got a u-joint going out on the front driveshaft and was curious which was easier to replace. 1. The entire front drive shaft 2. Just one u-joint.

I got a stock t-case skid for $10 bucks, but I can't figure out how to put it on. I know where to bolt it up at, but how do I get the bolts in the frame?

Well I got the rear lifted...it's about 3in, and I was gunning for 2-2.5in. OH well. Anyways it seems that 3 out of the 4 upper shock bolts(the threads) stipped(not broken). Does anyone by chance know what size they are? Also would I be able to just use a self tapping bolt, or would that be...

Where can I get these? I am lifting tonight and just remembered I need some, and it seems that no one has any. Are they called something else, because this is what I pulled from Autozone's site on a description for a lift kit, but they dont' sell them.

After I got in town today it started pouring down rain really hard, and teh streets were literally flowing like rivers it was coming down so hard. I went through a couple puddles and got my engine pretty wet(no water in the air box, I did think to check). It wasn't a purposeful splash, but it...

I am lifting my Jeep on monday and I am using blocks(for about a month till I get my S-10 leaves ready). I need to go up 2 in this next week, and blocks are the cheapest(i.e. I can get some for free). My question is are the u-bolts that come in the kits from Autozone, and advanced auto the...

Now that it is getting cold I was wondering what all I should do to prepare for winter. This weekend I am buying an extra blanket at goodwill for the Jeep. I am also changing all the fluids(just to make sure I have the right amount of antifreeze). What else should I buy and do to my XJ to...

Will the leaf springs from a 97+ Cherokee fit a 1991 Jeep Cherokee with out modification? I am looking for donor packs and all I can find here are 97+ Cherokee's.

I recently bought a 1991 Jeep Cherokee with the 4.0 engine and NP-231 t-case. I notice that my front driveshaft spins even though I am in 2hi. Should it be doing this and what would be causing it if it isn't supposed to be spinning.

What exactly does a track bar do? I found one on my 68 Jeepster Commando and was curious since I know that they are normally not for vehicle with leafs in the front. What use would it be on a leaf sprung vehicle? Thanks!

Does anyone know what the factory 0-60 time is? I am wanting to know because one of my friends with a crappy honda accord with about 140hp(and that's pushing it), and he is wanting to drag me. Also any ways to cheaply improve the time?

What is the Rubicon Group for the 1991 Jeep Cherokee? I just got the build sheet for mine and was curious.

Should I change my oil if it is 50 degrees out? I will be outside when doing it.