Recent content by lifted00

Wont the head liner be wet if it was the roof rack?

Nope, I can see this leaking between the door panel and door and puddling up on the trim above the carpet. Where do the roof racks leak at? Down the A pillar and onto the floor?

I fought and fought trying to find this leak. I finally found water leaking between the window and weatherstrip belt. But by looking at the pictures of the bottom of the door it appears that there are drain holes. Is water suppose to seep in there if these are drain holes? The water seems to...

The liberty came out in 2002. The 2002 came with drum brakes on the rear. Every year after that, they came with rear discs. The parts stores list a pre/after 06 caliper but there isn't enough difference to tell. I looked at them both at the parts store. But yea, thats all you would need...

I had the head swap done on mine. I used the original 2000 exahaust manifold. I just had to get a custom adapter plate.

haha thanks...... That was pretty much the whole point of this thread that the guy found a yoke that worked on the Cherokee's. But no one can produce any info on it.

:dunno:

I do have a rock lizard style bumper which will keep me from rubbing the front endcaps but I see your point for the rear.

This pic is of a members ride posted a long time ago (2 yrs. or more) but can't get ahold of him. He posted it had a 4.5" lift with 33x10.50's. Do the fenders looked trimmed? I was wanting to do the same setup. If he does have a 4.5" lift and 33's his setup looks like it won't rub too much...

I was wanting you opinion on these wheels. They will be used so I could get a good deal on them. They are 15x8 w/3.75 BS. What do you think about these or do you think the stockers look better? I just don't want them to stick out TOO far and look ghetto.

I just wanted to go with an aftermarket wheel and I came across that size used for a good deal. Plus my fronts already rub on the LCA's. I'd rather not put in steering stops on the knuckles either.

This is a pic with 31/10.50's on 3 inches of lift with factory wheels. If I go with a 15x8 w 3.75" backspacing wheel with the same tires will I need to do something to the fenders to keep from rubbing? It looks pretty close now. I got 2.5" extended bumpstops all the way around right now.

This job here took some time while I was trying to juggle work and family. It was more of a hobbie thing to me. So this one is exclusive. There won't be any mass production in the future.

Thanks:clap: I knew you would like it.

I don't have a close up picture but the tire carrier is a piece of 1 1/4" tubing sch. 120 with a 3/4" bushing inside of it. I welded a 3/4" grade 8 nut to the top of the d-ring shackle and welded a 3/8" plate to the top of the bumper. Ran a 3/4" grade 8 bolt thru the top bracket and it screws...