Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to the new NAXJA Forum!
If your password does not work, please use "Forgot your password?" link on the log-in page.
Please feel free to reach out to [email protected] if we can provide any assistance.
The price I paid would probably be irrelevant as I'm from South Africa - I paid about R3000 for a complete set front and rear (the rear is 60/40 split and takes a bit of modification to get in, it's currently work in progress!)
As far as I know any WJ seat will bolt onto the XJ bracket (mine's...
You said you don't want Jeep seat, but I have these seats from a WJ Grand Cherokee Laredo in my XJ and they are way comfy'er than the originals. Oh, and it's a straight bolt in.
Bear in mind that OME were designed in Australia where they have RHD vehicles, so you have the torque action AND the driver weight all to the same side, hence why they say the A-spring go on the driver side and the B-spring on the passenger side. I drive a RHD Jeep (see my location) and had my...
I replaced my 33" Goodyear MTRs a few days ago with 33" Bighorns and I cannot be happier! I haven't been offroad with the Bighorns yet, but on the road they are miles better than the MTRs - much quieter and they grip a wet road much better.
I've always thought the MTRs are one of the best...
I have the WJ knuckles with OTK steering and run 15x8 Cragar D-windows with 4" backspacing. They clear the tierod alright, but the clearance between the WJ caliper and rim is very tight - I'd suggest go for 3.75" backspacing, but 4" backspacing will work.
Totally agree, and what is even better - it flexes much better than a heavily arched spring.
In the pic below I only have one extra leaf, but the result would be the same with the other one added as well.
I have a printed OME catalog from July 2006 and it doesn't list an OME 939 - up to a 938 and then from 940 onwards again. It could be that my catalog is too old, or that there was a 939 that has been discontinued?
JNickel, yes the bottom spring is the support spring the made and no's 2 and 3 from the top as well. At the moment I'm running one 7 leafs! The shorter one of the top two I've removed, but I think I'll add it back the day I fit a new rear bumper with sparewheel carrier just to assist carrying...
My first choice was KM2s, but they've been on backorder for months now (check my location!). I was considering replacing the the MTRs with a new set as my spare is a brand new MTR, but they are nearly a third more expensive than the MTZs. Naturally the Bighorns are even cheaper, but with all the...
I am in the process of getting new tires (33s). My decision is between Bighorns and M/T MTZs. From what I've read they are both good all round tires that do most things well. Are there anybody that has experience with both these tires that can tell what their preferance would be between the two...
A lot has been written about prop valves and that they only work under hard braking, etc. When I did my rear disk swap I had basically no improvement in braking after the disk brake swop while retaining the stock prop valve. However, when I changed it to a ZJ prop valve (only swopped over the...