sidriptide
nobody of any consequence
- Location
- western massachusetts
i ask this because i have a set of 297 shafts and the ears on one of the outers seems bent somehow.. cant press the cap in anymore to get the 2nd c-clip on the inside... so close, like 1/2 the width of the clip itself, its not a misplaced needle inside like i initially thought.. how reasonable would it be to weld the cap on the outside?? i was planning to do this anyways with a few "tacks" on each cap. but without the clip i'm just not sure....
this would be in the YJ trail rig with a lock-right in the front and 31s... not a super-rig by any means but not sure about doing it without the c-clip...
i'll probably weld it and keep it as a spare but was wondering about the loads on the actual joint and in what direction the forces work....
thanks
this would be in the YJ trail rig with a lock-right in the front and 31s... not a super-rig by any means but not sure about doing it without the c-clip...
i'll probably weld it and keep it as a spare but was wondering about the loads on the actual joint and in what direction the forces work....
thanks