XJamsoil
NAXJA Forum User
- Location
- New Mexico
So my 99 Sport had been running good without issues until about an hour ago.
My wife went to move the Jeep and she said it just clicked.
Went out and checked it out and sure enough it just clicked.
So being as the interior lights were dim I figured battery, jumped it and after a couple of minutes it ran but interior lights were flickering. The flickering went away and they stayed nice and bright. I took it around and the Check Gauges light came on and I noticed that the volts were at 19.
Got home, turned off the Jeep and tried to start it again, lights were dim and then click.
I pulled out a voltage meter and the battery read 12.6. I opened the driver door and noticed that the lights were still dim.
I have checked all my connections, battery, alternator, starter etc and all are good.
I went back to see if it started up and click.
As you can see I am way to confused to even start with a possible solution.
I have 12.6 on the batt, but the interior lights make it look like I have 3 volts, and then there is the click not to mention the 19 volt reading.
Any help would be greatly appreciated as this is our only vehicle.
My wife went to move the Jeep and she said it just clicked.
Went out and checked it out and sure enough it just clicked.
So being as the interior lights were dim I figured battery, jumped it and after a couple of minutes it ran but interior lights were flickering. The flickering went away and they stayed nice and bright. I took it around and the Check Gauges light came on and I noticed that the volts were at 19.
Got home, turned off the Jeep and tried to start it again, lights were dim and then click.
I pulled out a voltage meter and the battery read 12.6. I opened the driver door and noticed that the lights were still dim.
I have checked all my connections, battery, alternator, starter etc and all are good.
I went back to see if it started up and click.
As you can see I am way to confused to even start with a possible solution.
I have 12.6 on the batt, but the interior lights make it look like I have 3 volts, and then there is the click not to mention the 19 volt reading.
Any help would be greatly appreciated as this is our only vehicle.