_MURDERED OUT_
NAXJA Forum User
- Location
- Hernando, MS
I have no reason for posting this other than to show anyone who might want to move or need to reposition their rear shock upper mounting points how to simply do so. I did this because of stretching the rear end back about 5" or so and needed to make some sort of crossmember for the shocks to bolt to. So i made this deal, it bolts under the frame using the factory 2 bolts per side that once held the bumpstops on.
And i had to cut off one of the lower shock mounts and move it around from the rear of the axle to the front of the axle.
hope somebody may get some use or idea out of this....
And i had to cut off one of the lower shock mounts and move it around from the rear of the axle to the front of the axle.
hope somebody may get some use or idea out of this....
Last edited: