I have a straight 1.5" OD tie rod OTK from knuckle to knuckle and it hits the coil buckets way before full lock. Limits my steering a lot. I've trimmed them all the way back to the spring and now the steering hits the spring. Since the JKS track bar mount is welded to the front of the coil bucket, I can't trim that one back anymore and it interferes with the tie rod as well.
Not sure why more people don't have this problem. Only solution I can see is to completely relocate the springs back about an inch, which is major work and probably means I have to replace the coil buckets entirely. Couldn't use the JKS track bar mount anymore, would have to get one of the ones posted above.