So, I can verify that the GM brake lines work great. Just picked up a set at NAPA and installed them. I am on a 3 inch lift right now and if anything they are too long. I forgot to measure the stock but I would say they are a good 4-5 inches longer. Deffinetley plenty of length and it is a bolt on affair. Only a tiny modification needed. You have to slightly pry open the mounting bracket and slide it to the top of the line. I am happpy I chose this over SS braided or the YJ lines. I really did not like the way the YJ's had that huge hard pipe sticking out. The GM's hard pipes on the caliper end are only slightly longer then stock yet seem a little thicker.
I will post some
hoto:'s if I ever get my lazy arse around to it..
Quote:
Originally Posted by
YeaItsSlo
What do we do about the rear now??
As far as the rear goes, I went with the '96 Dakota 4x4 rear that people where recomending. Straight bolt on with no mods needed. It does have clips for ABS line on it that I suppose you could cut off so they don't get hung up on anything but I really don't see the need.
NAPA PART NUMBERS:
FRONT GM LINES
38620
38621
1996 4x4 Dakota center rear brake line
38636