Cherokeekid88
NAXJA Forum User
- Location
- North Carolina
My Cat and muffler and all piping in between is 2.5" then I am running the stock 2.25" tailpipe to a 2.25" inlet/3" outlet tip.....Now I want to get the 2.5" tailpipe to go along with it. I have a place that is already going to bend it up for me and everything, but upon looking further..I am worried about clearance issues. I am running 3.5" RE full packs with a 1" shackle and a Reese hitch. The exhaust cannot go between the leaf packs and the trailer hitch, no way. So when I had my exhaust redone the guy had to slant the tip down to clear everything and I hate the way it looks...the tip sticks out too far and I hate how much closer it is to the ground. I was just wondering what you guys did if you have the full 2.5" exhaust...and if you could post some pics of your 2.5" setup..that would be even better. I realize that I could just have the tailpipe cut shorter and then run a nice tip further back but still past the rear axle, but I also don't want to lose sound on account of having to either have no tip because of clearance issues or having to downsize part of the tailpipe back to stock 2.25". Just wanted some visual ideas from you guys on what you all are running with your 2.5" exhaust and any fitment issues you've had.
Thanks,
Cory
Thanks,
Cory