confused
NAXJA Forum User
- Location
- Colorado Springs
I'm replacing front end parts on my '91 XJ. I know that the ZJ V8 tie rod and TREs are an upgrade to the XJ. What about the drag link? Is it beefier than the XJ also or about the same?
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
ZJ and XJ drag link question
- Thread starter confused
- Start date
chelms27
NAXJA Forum User
- Location
- Elkhorn, Nebraska
Same
jorcie7
NAXJA Forum User
- Location
- Los Angeles
sorry to revive this old thread but Im gonna replace the sterring tie rod and draglink. I have three part numbers for AutoZone for the draglink. For XJ: ds1238 and for ZJ: ds1310 & ds1311. any body know the difference?
Dozer11B
NAXJA Forum User
- Location
- Ft Polk, LA
Based off of the above posts, I would go with DS1238...
That just shows me a TRE. Are you talking about the draglink itself?
Basically you just need the ZJ tie rod and XJ drag link.
If you need a TRE for your XJ drag link then get the XJ TRE number.
That just shows me a TRE. Are you talking about the draglink itself?
Basically you just need the ZJ tie rod and XJ drag link.
If you need a TRE for your XJ drag link then get the XJ TRE number.
magimerlin
NAXJA Forum User
- Location
- Flatonia, Tx
Find my post in a longer thread about the ZJ steering. I put measurements in my post about them.
Dozer11B
NAXJA Forum User
- Location
- Ft Polk, LA
looking a little deeper on autozone it shows ds1238 is actually the drag link, but called "rare parts/tie rod end"...
- Location
- on the beach in Ocean View, VA
yup-- DS1238 will do the trick (and is a thicker upgrade for 1990 and earlier steering-- Damn Renix steering junk)
