Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to the new NAXJA Forum!
If your password does not work, please use "Forgot your password?" link on the log-in page.
Please feel free to reach out to [email protected] if we can provide any assistance.
dont need the truss, just 2 of the passenger side mounts, the 60 is flat on top with a 1/4" bolt on plate dont need a truss, just 2 of the passengers side mounts
I suggest contacting Fullsize or RE or any other RE dealer and telling them what you want. RE sells all their components individually. What you are looking for is one of these numbers (RE9968 through RE9993), they will know which exactly.
dont need the truss, just 2 of the passenger side mounts, the 60 is flat on top with a 1/4" bolt on plate dont need a truss, just 2 of the passengers side mounts
Mine are 3" channel with 1/4" flatstock welded in. I flame cut the holes and cleaned up with the die grinder then tack welded in the bushing sleve... i only did that because the flatstock and channel was free - and i didnt have extra cash to buy more metal.
Mine are 3" channel with 1/4" flatstock welded in. I flame cut the holes and cleaned up with the die grinder then tack welded in the bushing sleve... i only did that because the flatstock and channel was free - and i didnt have extra cash to buy more metal.
Well with the 60 I have to be taller than stock by 1 1/4", so I will cut the top off the stock one and slip it into another 2x3x1/4 wall tube and then match height to minium height on the drivers side pumpkin, I will use a cut one there also.. Thanks for letting me think outloud :wave: