- Location
- Port Orchard, WA
so i put my 4.5" RE springs in, and only got 4" of lift. not too bad, but everyone said to expect 5 to 5.5 from them. This is probablt because i have about 200 lbs of tools in the back. im wondering if there is anything that i can do (short of shackle) that will hold them up more...
i bought the leaves used (only had 4 trail runs on them)
i took the tools out and it sits true at around 4 3/4" above stock (using 17" from flare to hub center)
just wondering if there is aything i can do to make the rear sit level with the front with my tools in.
92 4.0 d30/35 RE 4.5" lift AX-15 231 235/75r15 BFG AT
good times!
i bought the leaves used (only had 4 trail runs on them)
i took the tools out and it sits true at around 4 3/4" above stock (using 17" from flare to hub center)
just wondering if there is aything i can do to make the rear sit level with the front with my tools in.
92 4.0 d30/35 RE 4.5" lift AX-15 231 235/75r15 BFG AT
good times!