beakie said:any thought of sandwiching the roof. weld plate to top of cage, plate to bottom of halo/roofrack. sandwich the roof with these two, 4 bolts, each at one corner.
should be strong and will keep it weather tight.
JeepFreak21 said:This is discussed in one of the URF cage threads. CRASH suggests welding the tube directly to the roof.
I'll probably ask his wife to weld mine when the time comes
Billy
mattyj said:This is what i did. They tie the exo into internal bars/hoops at the b & c pilar areas. Basically inside there is a matching plate that follows the contour of the roof and sandwiches it together.
here is a shot before the plates at the c pillar were added and it was all welded up.
ruggedjeep said:Mattys rig.
JeepFreak21 said:So, the flanges must be under the headliner? What's with the other two flanges between the B & C Pillars?
Billy
karstic said:Matt
Do you have a picture from inside?
karstic said:Thanks for the pictures, Matt
So is it the diagonals that tie into the bracket on the roof?
Does the tubing go through the roof and are welded to the bracket for the halo? Or is the roof sandwiched between two plates?
Gonna be at JV?