solomon7
NAXJA Forum User
- Location
- Portland OR
Lately my trans has been sticking in OD when I let off the pedal. It holds in down to 30mph sometimes until I tap the brake.
I'm hoping it's not the solenoid, but haven't tested the TPS since I don't know how, though it was all cleaned along with TB and IACV a couple months ago, connections dielectric greased, pins and all. Seafoamed it too after a can of mopar comb. chamber cleaner so that area is clean.
I also recently changed to AT4 ( A few XJers said it's the same as dexmerc3 supposedly PLEASE correct me if they're wrong!))
I've heard there is a torque converter related switch near the brake switch. Does anyone know where it is what it looks like, and how to clean or fix it if possible?
Are there any other possibilities?
I get no CEL and the OBD is just 12-55
96xj 146,000 AW4
I'm hoping it's not the solenoid, but haven't tested the TPS since I don't know how, though it was all cleaned along with TB and IACV a couple months ago, connections dielectric greased, pins and all. Seafoamed it too after a can of mopar comb. chamber cleaner so that area is clean.
I also recently changed to AT4 ( A few XJers said it's the same as dexmerc3 supposedly PLEASE correct me if they're wrong!))
I've heard there is a torque converter related switch near the brake switch. Does anyone know where it is what it looks like, and how to clean or fix it if possible?
Are there any other possibilities?
I get no CEL and the OBD is just 12-55
96xj 146,000 AW4