Chad(99-XJ-Sport)
NAXJA Forum User
- Location
- Sterling Hts, Michigan
I am getting ready to purchase a 3.5" RE6025(w/full leaf packs) and a set of OME nitro shocks for my 1999 XJ sport.
My main concern is: Will I need to purchase the SYE kit and a new CV drive-shaft?
I have read a little about the vibration problems that will occur from increasing the angle of the "stock shaft" but not enough to make up my mind.
If I do need the "kit and shaft" where might I find a quality set-up for a reasonable price tag?
1999 XJ Sport 70k miles.
4.0L I-6
NP231 T-case
Auto Trans.
"bone stock"
If you have any other advice about this RE"kit" please let me know.
Thanks......
Rookie
My main concern is: Will I need to purchase the SYE kit and a new CV drive-shaft?
I have read a little about the vibration problems that will occur from increasing the angle of the "stock shaft" but not enough to make up my mind.
If I do need the "kit and shaft" where might I find a quality set-up for a reasonable price tag?
1999 XJ Sport 70k miles.
4.0L I-6
NP231 T-case
Auto Trans.
"bone stock"
If you have any other advice about this RE"kit" please let me know.
Thanks......
Rookie