Okay, this isn't the usual kiddie lockout thread. I've been messing with this nonsense for 2 days and can't for the life of me figure it out.
In my '99 the right rear window will not roll up with the switch on the rear door. Down works fine, but no up. The drivers panel will not roll it up or down...it would occasionally work, but now doesn't work at all. It has nothing to do with the child lockout on the windows...all the other windows work fine on their own switches, and I have a full 13.5V at the back switch connector with the engine running and 12V+ with the engine off.
I have tested everything for power, checked contiunity on the switch, disassembled and cleaned both the drivers and right rear switches and everything seems to check out fine.
Here is the weird part...I can jump the switch connector on the rear door with wires and the window works fine. However, when I tried using the switch from the other rear door I get the same problem.
I'm at a total loss. Motor works...switch works...have power and ground...what am I missing?
Please help me before I replace all of it with mil-spec toggle swtiches?
In my '99 the right rear window will not roll up with the switch on the rear door. Down works fine, but no up. The drivers panel will not roll it up or down...it would occasionally work, but now doesn't work at all. It has nothing to do with the child lockout on the windows...all the other windows work fine on their own switches, and I have a full 13.5V at the back switch connector with the engine running and 12V+ with the engine off.
I have tested everything for power, checked contiunity on the switch, disassembled and cleaned both the drivers and right rear switches and everything seems to check out fine.
Here is the weird part...I can jump the switch connector on the rear door with wires and the window works fine. However, when I tried using the switch from the other rear door I get the same problem.
I'm at a total loss. Motor works...switch works...have power and ground...what am I missing?
Please help me before I replace all of it with mil-spec toggle swtiches?