Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to the new NAXJA Forum!
If your password does not work, please use "Forgot your password?" link on the log-in page.
Please feel free to reach out to [email protected] if we can provide any assistance.
i picked up a tip from jeeperjohn and its been working great for me. drill 4 or 5 big holes in the rubberclose to the outer edge, then use a chisel and a hammer to fold the sleeve inwards towards the space you just drilled out. once you fold it inwards it will pop right out with a few smacks of the hammer.
The best way is to buy or rent a ball joint press which is basically an oversized C-clamp with a bunch of adapters. You can just push the old ones out and the new ones in. If you push the rubber out of the originals you can use a sawzall to cut the outer sleeve and it will fall out (much easier than trying to fold it out)