JMH
NAXJA Forum User
- Location
- North Carolina
Specs first: 1993 4.0l, auto trans, cherokee country 4door
Searched for post and found a few ideas to look into...
Problem first started the other day as i got into the jeep and started it up the radio didn't come or the dome lights when i open the door up. Went through the fuses to fine Fuse #9 (10amp) was blown replaced it and everything worked for a few hours anyway.. Got back in the next moring it was blown again. Pulled out the radio i installed 2 years ago to check things out. everything looked fine traced the wires up into the wireing harness adapter, then up to the wires are taped...
The wire i'm trying to trace near as i can tell with the cheap book i have is the Pink wire (always hot). Does anyone have a drawing or diagram of this wire, as all mine shows is from the fuse block to the door and ect , nothing pass firewall (looking for detail like from the battery to the fuse box or whole thing ). Has anyone traced this wire before in this year to know which side and where the wire runs though the firewall. As the last thing i want to do is tear out the dash to trace this wire and take lose all the wiring loom, I'm thinking it's grounding out somewhere as it passes though the firewall.
Also heres a pic of the fuse box area theres a red wire that is like stuck in the box been in there sence i bought the jeep .. Any one have idea what this is ? http://www.geocities.com/vampires_kiss2001/untitled-1.html
I have a Digital Multimeter that i just got but the instructions are not as plain as i hoped , can anyone tell me or point me to a good site that tells me how to test with it. Heres a link to what i have http://www.iequus.com/item.asp?cid=60&pid=3320 and i've download the pdf also but still kinda lost as to how to use it Right.
If you need more info or anything else email me at [email protected]
thank you in advance in any help you can post for me to fix this problem , really hate not having my radio
Searched for post and found a few ideas to look into...
Problem first started the other day as i got into the jeep and started it up the radio didn't come or the dome lights when i open the door up. Went through the fuses to fine Fuse #9 (10amp) was blown replaced it and everything worked for a few hours anyway.. Got back in the next moring it was blown again. Pulled out the radio i installed 2 years ago to check things out. everything looked fine traced the wires up into the wireing harness adapter, then up to the wires are taped...
The wire i'm trying to trace near as i can tell with the cheap book i have is the Pink wire (always hot). Does anyone have a drawing or diagram of this wire, as all mine shows is from the fuse block to the door and ect , nothing pass firewall (looking for detail like from the battery to the fuse box or whole thing ). Has anyone traced this wire before in this year to know which side and where the wire runs though the firewall. As the last thing i want to do is tear out the dash to trace this wire and take lose all the wiring loom, I'm thinking it's grounding out somewhere as it passes though the firewall.
Also heres a pic of the fuse box area theres a red wire that is like stuck in the box been in there sence i bought the jeep .. Any one have idea what this is ? http://www.geocities.com/vampires_kiss2001/untitled-1.html
I have a Digital Multimeter that i just got but the instructions are not as plain as i hoped , can anyone tell me or point me to a good site that tells me how to test with it. Heres a link to what i have http://www.iequus.com/item.asp?cid=60&pid=3320 and i've download the pdf also but still kinda lost as to how to use it Right.
If you need more info or anything else email me at [email protected]
thank you in advance in any help you can post for me to fix this problem , really hate not having my radio