Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to the new NAXJA Forum!
If your password does not work, please use "Forgot your password?" link on the log-in page.
Please feel free to reach out to [email protected] if we can provide any assistance.
Just take the output line off of the pump and remove the adapter it screws into. Take a drill bit a couple of drill sizes bigger than the hole in the orifice and drill it out. Install a smaller pulley and you should have plenty of flow and pressure. Cost= $0.0 if you have some drill bits, and $65 for the pulley from PSC.
No, I never run a stock pump. A good performance pump is the same cost as a new stock pump from an auto parts store. I do run the smaller pulley, which is highly recommended for hydro assist or full hydro, but like John said should also work well with a stock pump.
I don't know of anyone with any 4x4 or rock buggy or desert truck that runs an electric PS pump. Running the pump off the serpentine belt works very well.
Just take the output line off of the pump and remove the adapter it screws into. Take a drill bit a couple of drill sizes bigger than the hole in the orifice and drill it out.
No, I never run a stock pump. A good performance pump is the same cost as a new stock pump from an auto parts store. I do run the smaller pulley, which is highly recommended for hydro assist or full hydro, but like John said should also work well with a stock pump.
I don't know of anyone with any 4x4 or rock buggy or desert truck that runs an electric PS pump. Running the pump off the serpentine belt works very well.
Hate to jack a thread, but are you guys running stock steering boxes as well? I really dont like the variable ratio, anyone run a YJ box? I know its possible and everything, just want to know if ya like it!
a YJ box? is that a bolt in with out spaceing i now the durango is but u need to space out from the frame cuz its a bigger bore may be of thinking of doing that istead of the durango its a batter box then the xj's to lazy to order the backit for the durangos :speepin:
ok look in to it. and for the Durango box what do u think of this Inner Steering Box Brace from T&T customs. http://tntcustoms.com/innersteeringboxbrace.aspx I talk to the guy and was really cool and told him abought the Durango box and he can weld longer bolt spacers if need but he said it should but if not put a couple washers :worship: but :shhh: dont tell the wife