parts clean out

[MATTVW65]

this is a short list if there is something I have that you might need or are looking for call or text me at 801-725-0112

Matt

2000 Xj engine 4.0 accessories on engine $800

1990 xj engine 4.0 $200

1998 xj engine 4.0 has a rod knock $100

Rubicon express upper rear control arms super flex adjustable zj or tj $100

Rubicon express lower control arms ft or rear adjustable super flex Xj tj or zj $150

Rubicon express upper control arms super flex fixed xj zj or tj $100

Rubicon express lower control arms ft or rear fixed super flex Xj tj or zj $150

tearaflex adjustable lower control arms
xj tj or zj $100

skyjacker fixed lower control arms $40

skyjacker track bar $50

rear overhead speaker tray $50

teraflex 2" lift shackles $100

sky jacker extreme drop pitman arm $100

rubicon express drop pitman arm $40

skyjacker bump stop set $20

transfer case drop kit $20

tearaflex quick disconect set $40 4" lift

full s.s.t custome built sway bar disconect set $100 for 8" lift

jks bar pin elimator set $20

rear lift blocks 3" $15 2" $10 steel 3" $20

1 1/4 wheel spacer set 5x4.5 $50

dash cluster 97+ $50

ft drive lines $40 each

steering gear box $40

1994 8.25 rear axle $100 3.07 gears
1994 dana 30 axle complete $200 3.07 gears

1993 dana 30 3.55 gears $200
1996 dana 30 3.07 gears $200

xj dana 30 4.10 gears lock rite $250
xj dana 44 rear axle 4.10 gears and full spool $400

1997 zj dana 30 3.55 gears $200
1997 zj dana 35 3.33 gears $200

2000 xj dana 30 3.55 gears $200
2000 xj dana 30 housing $100

1996 ax15 transmission $400

1994 ax15 transmission $400

1996 231 transfer case $200

197ish chev dana 44 with flat top knuckles $150

cross over stearing arms $40

ft 2000 xj drivers side seat $100

rear 2000 seat $40

1997 front seat drivers $100 passenger $50

rear $40

01 fuel tank with pump $50 each

 

[91to99]

xj dana 30 4.10 gears lock rite $250

Is this just the lock rite? Or gears and lock rite? Or semi-complete axle?

 

[Bdiddy11]

Wheels spacers are 1 1/4"? And set meaning set of 2 or set of 4? Brand/condition please...

 

[MATTVW65]

There is only 2

 

[91to99]

Is this just the lock rite? Or gears and lock rite? Or semi-complete axle?

:dunno:

 

[MATTVW65]

:dunno:

Complete axle

 

[X1994J]

I'll take the 2000 rear seat if it's gray.

 

[MATTVW65]

It is grey

 

[91to99]

Complete axle

Is it vacuum disconnect?
What kind of shape are the internal bearings in?
Any idea what year it is?

 

[kmboren]

Are the cross over steering arms two separate arms like the ones needed for the WJ or Teraflex kunckles conversion? Do the have the TREs and if not do they take stock ends or a larger one that threads into them?

 

[wheelinscott]

you have any >97 front fenders?

 

[MATTVW65]

Are the cross over steering arms two separate arms like the ones needed for the WJ or Teraflex kunckles conversion? Do the have the TREs and if not do they take stock ends or a larger one that threads into them?

they are for chev flat top knuckles

you have any >97 front fenders?

Yes I think

Is it vacuum disconnect?
What kind of shape are the internal bearings in?
Any idea what year it is?

it is in running shape non disco 90 axle

 

[gorillaxj]

Do you have any front power door latches for 97+?

 

[MATTVW65]

Do you have any front power door latches for 97+?

i dont

 

[gorillaxj]

i dont

Ok thanks.

 

[98XJROKS]

Do you have a stock pitman arm? [email protected] if so.

 

[baileyevesdaddy]

The 2 inch lift blocks; are they solid or have two holes in the middle? What part of town are you in?

 

[MATTVW65]

Do you have a stock pitman arm? [email protected] if so.

Yes

 

[Johnnie Walker]

Any of the LCA's available?

 

[MATTVW65]

The 2 inch lift blocks; are they solid or have two holes in the middle? What part of town are you in?

Hollow and I live in Layton

Any of the LCA's available?

Yes