bigerich
NAXJA Forum User
- Location
- Denver, Co
All lift parts were installe dnew about 3 years and 10,000 miles ago. Some minor rub marks, paint chips and surface rust. Al work fine.
I pulled my lift off and am selling all the parts here is what is available:
Rubicon Express 4.5" lift coils - $125 for pair
RE Super Flex fixed Lower Control Arms - $125 for pair
RE Super Flex fixed Upper Control Arms - $125 for pair
RE Extreme Duty Track Bar(Double Shear)W/Bracket - $200
RE Sway Bar Disco's (4.5" lift, could go little taller or a little smaller - $75
RE Mono Tube shocks, with BPE front and rear - $175 all four shocks
RE 1.5" lift shackle - $50
RE 3.5" lift rear leafs - $75 for pair (The driver side I pulled off has a cracked leaf, not sure if the new ownership at RE will warranty or not)
I also have a set of five Jeep Rubicon Moab wheels with 285/75/16 (33x11.50ish) Firestone Destination M/T's. Wheels have some rubs marks, tires are about 1/2 worn, I can get tread measurements tonight. - $550 for all 5
All parts are pulled and ready to go, located in North Denver Area.
PM or call if you have questions - 805-796-7834 - Eric
Thanks!
I pulled my lift off and am selling all the parts here is what is available:
Rubicon Express 4.5" lift coils - $125 for pair
RE Super Flex fixed Lower Control Arms - $125 for pair
RE Super Flex fixed Upper Control Arms - $125 for pair
RE Extreme Duty Track Bar(Double Shear)W/Bracket - $200
RE Sway Bar Disco's (4.5" lift, could go little taller or a little smaller - $75
RE Mono Tube shocks, with BPE front and rear - $175 all four shocks
RE 1.5" lift shackle - $50
RE 3.5" lift rear leafs - $75 for pair (The driver side I pulled off has a cracked leaf, not sure if the new ownership at RE will warranty or not)
I also have a set of five Jeep Rubicon Moab wheels with 285/75/16 (33x11.50ish) Firestone Destination M/T's. Wheels have some rubs marks, tires are about 1/2 worn, I can get tread measurements tonight. - $550 for all 5
All parts are pulled and ready to go, located in North Denver Area.
PM or call if you have questions - 805-796-7834 - Eric
Thanks!
Last edited: