Thanks for all the input guys. I am running the RK 8 Inch kit. The rear springs have sagged alot. I also am in the process of fabbing some bumpstops, that is why I have tire rub. I am trying to get them perfect so they don't limit up travel any more than nessacary.I also have drop shakles that add 1 inches of lift. I know this sounds like WAY too much lift, but after the springs have sagged it sits lower than my friends zj with RK 6.5 inch kit. The rear fenders are cut as far as they can be without getting into the doors.The reason I say I like the setup is the flex and ride are good.There is a little spring wrap, but not very bad. I know I should get full springs, but with the bumpstops on the way, it will work for now. I know this is not ideal, but thats what I have for now. By the way I drilled out the block, and put in a new bolt to replace the center pin. This is what RK suggested to me when I called and asked about a replacment block. Please don't think I am a dumb a**, I KNOW this setup is not ideal.