MyJeepXJ
NAXJA Forum User
- Location
- SW Virginia
220V arc with 6011 should be plenty, Im guessing 110-135A should be plenty.
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
I need some welding advice
- Thread starter xj4life
- Start date
Mr.OverKill
NAXJA Forum User
- Location
- the city of El Cajon
6011 1/8 at around 80 to 110 amps 6011 3/32 65 to 75 amps, play with it from there, and work the rod, puddle, out, puddle, out in a rythemMyJeepXJ said:
O.D.
NAXJA Forum User
- Location
- New Mexico
The mig is more than enough to handle your whole job. I'd just use that.
jeep_87_cherokee
NAXJA Forum User
- Location
- Waverly, IL
whatever you do, remember this "THE GRINDER IS YOUR FRIEND"
Rod: With mild steal to mild steal all most any rod rated (Good) will do for this type of gob. Find a you like and stick with it.
To cast: The 70s likes cast. But many will do just fine.
Amps: Penetration, penetration penetration. What ever amps it takes to cut deep. Many people not use to rod end up running cold and just ends up laying it on top, It looks good and is easy to grind off after the weld false.
To cast: The 70s likes cast. But many will do just fine.
Amps: Penetration, penetration penetration. What ever amps it takes to cut deep. Many people not use to rod end up running cold and just ends up laying it on top, It looks good and is easy to grind off after the weld false.
Rod: With mild steal to mild steal all most any rod rated (Good) will do for this type of job. Find a you like and stick with it.
To cast: The 70s likes cast. But many will do just fine.
Amps: Penetration, penetration penetration. What ever amps it takes to cut deep. Many people not use to rod end up running cold and just ends up laying it on top, It looks good and is easy to grind off after the weld false.
To cast: The 70s likes cast. But many will do just fine.
Amps: Penetration, penetration penetration. What ever amps it takes to cut deep. Many people not use to rod end up running cold and just ends up laying it on top, It looks good and is easy to grind off after the weld false.
