Big Red
NAXJA Forum User
- Location
- Roscoe, IL 61073
I need to install my hp44 f-150 rare leaf sprung f-150 axle under my xj and was 1st thinking of running leafs SOA, but came to the conclusion that keeping the 4 link would be a good thing. I'm going to keep it full width with the matching 9" in the back.
I currently have about 8" lift from a 5.5 re x-duty kit with with non adj control arms and drop brackets and 8" skyjacker XJ coils. I see that the RE front bracket kit for a TJ runs just under $400. Is there a cheaper alternative out there where I could buy a kit so that I would have the same axle mounting as the stock xj 30 with all the control arm mounts, coil mounts, and shock mounts? Please advise.
thanks...Troy
I currently have about 8" lift from a 5.5 re x-duty kit with with non adj control arms and drop brackets and 8" skyjacker XJ coils. I see that the RE front bracket kit for a TJ runs just under $400. Is there a cheaper alternative out there where I could buy a kit so that I would have the same axle mounting as the stock xj 30 with all the control arm mounts, coil mounts, and shock mounts? Please advise.
thanks...Troy