jimmydaux
NAXJA Forum User
- Location
- Centerville, Utah
Hey guys, I finally got around to building a new motor mount. It definitely looks frankenstein but I'm thinking it will be pretty stout and keep the drivers side mount from ripping apart. I used a piece of 2" galvanized pipe that I slotted and formed around the bushing. The piece of pipe was welded to the modified mount and then a strap was run over the top for added strength. I didn't want to have to use a press to install the bushing, so it was fitted to be snug, but has the set screw on top to keep it from working its way out. It still needs to be painted and tested, but I'm ok with how it turned out.