THRASHER
NAXJA Forum User
- Location
- Santa Cruz, CA
I am finishing up my full-width/leaf swap and need to take care of the steering. I am planning on full highsteer, but because of time and cash, I am going to go over knuckle untill I can get a highsteer setup. I found these heims on ebay...
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=4528271470&category=43974
I havent bought heims before, are there diff grades like there are in bolt, or will those work. I am going to use 1.25 x .281(not sure, have written somewhere) and tap the tube, not using any bungs. I am going to use misalignment bushings and drill my knuckles out for 5/8s grade 8 bolts...
Any opinions on the heims or the setup I am planning on using. If there is a better or cheaper place to get heims, how about a link...
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=4528271470&category=43974
I havent bought heims before, are there diff grades like there are in bolt, or will those work. I am going to use 1.25 x .281(not sure, have written somewhere) and tap the tube, not using any bungs. I am going to use misalignment bushings and drill my knuckles out for 5/8s grade 8 bolts...
Any opinions on the heims or the setup I am planning on using. If there is a better or cheaper place to get heims, how about a link...