anthrax323
NAXJA Forum User
- Location
- San Antonio, TX
Mmmkay... I'm finally putting the effing Jeep back together (2001 XJ) and am working on the overhead console and headliner right now. I peeled off the old headliner, got rid of most of the foam (haven't sanded yet), and wanted to see what you guys think.
Using 3M Headliner & Fabric Adhesive (38808), should I even consider coating the interior side of the headliner board with fiberglass resin first, or will this stuff adhere to the weird woven fiberglass-looking surface of the headliner board on its own? I picked up a quart, I just don't want to deal with it if it's of little benefit.
Anyone used 38808 directly on a 97-2001 headliner board? If so, how has it held up?
Using 3M Headliner & Fabric Adhesive (38808), should I even consider coating the interior side of the headliner board with fiberglass resin first, or will this stuff adhere to the weird woven fiberglass-looking surface of the headliner board on its own? I picked up a quart, I just don't want to deal with it if it's of little benefit.
Anyone used 38808 directly on a 97-2001 headliner board? If so, how has it held up?