Cheroskeet
NAXJA Forum User
- Location
- Oceanside
Hey all, Figure id do a write up as I'm getting ready to do the final stages of my suspension on my 99 Cherokee. I will give you a list ooh mods already done so you can see where I am currently at, as well as whats to come in the thread. I Traded my Toyota pickup for a 99 Cherokee last October and since then its emptied my pockets! I bought it dead stock and since January have done the following:
RE 5.5 Long arm
Full exhaust
Super 35 rear axle w/ Detroit locker
front Dana 30 w/ Aussie locker
Ruff stuff covers
Currie Heavy Duty steering
Rockhard 4x4 cage (soon to be removed for a Jeepspeed legal cage)
33" Red Labels and steelies (methods on order) X6
Race Radio
Lowrance GPS
Rear quarter panel armor as i recently destroyed my quarter panel.
Alot more done just don't feel like listing it all,
I started this build originally as a crawler but with co-driving and desert racing, Iv'e decided to make a dual purpose go fast and crawl type of rig.
With that said, I've just ordered new shocks all the way around and getting all parts together to completely finish up the suspension. I have 12" Fox Double Bypasses up front with PAC Racing Springs and 2" Fox Bumps and in the Rear I have 12" Fox 2.5 Resi's with 4" bumps. The shocks have about a month Lead time at the moment, and i still need to finish the rear shock mounts through the cab. I still need to order the new lower shock mounts from Barnett Performance as well as a couple little things. Frame stiffeners will be on the way as well which when installed will allow me to limit strap the front end. Stay Tuned as there is plenty to come!
RE 5.5 Long arm
Full exhaust
Super 35 rear axle w/ Detroit locker
front Dana 30 w/ Aussie locker
Ruff stuff covers
Currie Heavy Duty steering
Rockhard 4x4 cage (soon to be removed for a Jeepspeed legal cage)
33" Red Labels and steelies (methods on order) X6
Race Radio
Lowrance GPS
Rear quarter panel armor as i recently destroyed my quarter panel.
Alot more done just don't feel like listing it all,
I started this build originally as a crawler but with co-driving and desert racing, Iv'e decided to make a dual purpose go fast and crawl type of rig.
With that said, I've just ordered new shocks all the way around and getting all parts together to completely finish up the suspension. I have 12" Fox Double Bypasses up front with PAC Racing Springs and 2" Fox Bumps and in the Rear I have 12" Fox 2.5 Resi's with 4" bumps. The shocks have about a month Lead time at the moment, and i still need to finish the rear shock mounts through the cab. I still need to order the new lower shock mounts from Barnett Performance as well as a couple little things. Frame stiffeners will be on the way as well which when installed will allow me to limit strap the front end. Stay Tuned as there is plenty to come!