I would like to say I appreciate all the info on this thread but I did not see anything that fitted my situation (somewhat the swaps from an ax15 but not completely) so I figured I would ask( honestly I read the first 9 pgs and figured I would ask) so here goes I appreciate any help
I have a 80 cj7 completely torn down , had a 258 stock but I am replacing it with a 92 4.0 from a yj Wich had an ax15 behind it
I read in some magazine that the aw4 was stand alone so I went to the jy and pulled an aw4 out of a 93 xj 4x4
I took everything from the crank back (flexplatr, TC, sheilds) as well as the TCU I did not get the shifter and I cut the little deal that goes to the throttle body
So my question is how do I wire the TCU to the trans if it is stand alone, I was going to use a b&m but I can go get the stock shifter if I need to
If this is in this thread somewhere just tell me and I will find it and I really appreciate it y'all thanks cj
Sent from my Z981 using Tapatalk