my jeep died on me the other day and hasn't ran since. i can spray starter fluid in the tb and it'll run until the fuel is burnt, but as soon as i open the tb at all it dies. tried changing out the cps which didn't work, tried changing fuel pump relay out, tried by-passing the ballast, none of which did anything helpful.
i haven't been able to check the rail for pressure yet (hopefully tomorrow) but i know fuel is getting to it. i can prime it and press the schrader valve, but the gas doesn't shoot out, it just trickles. i also took the injectors out of the head while they were still hooked up and had a friend crank it, all injectors fired, but i'm not sure what that means.
wondering what all control fuel delivery and if anyone has any ideas on what i should be looking for. thanks in advance
i haven't been able to check the rail for pressure yet (hopefully tomorrow) but i know fuel is getting to it. i can prime it and press the schrader valve, but the gas doesn't shoot out, it just trickles. i also took the injectors out of the head while they were still hooked up and had a friend crank it, all injectors fired, but i'm not sure what that means.
wondering what all control fuel delivery and if anyone has any ideas on what i should be looking for. thanks in advance