Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to the new NAXJA Forum!
If your password does not work, please use "Forgot your password?" link on the log-in page.
Please feel free to reach out to [email protected] if we can provide any assistance.
Several companies made 5x4.5 and 5x4.75. I don't see it being possible to have a 5x4.5 and 5x5.5 on the same wheel. The center hole on most 5.5" patter wheels are 4". That would leave around .25" on the inside of the stud before cone recess.
Several companies made 5x4.5 and 5x4.75. I don't see it being possible to have a 5x4.5 and 5x5.5 on the same wheel. The center hole on most 5.5" patter wheels are 4". That would leave around .25" on the inside of the stud before cone recess.
I saw a set of those once. I fit 4.5 on 5 and 5 on 5 bolt patterns. The rim instead of having your standard hole had an oval tapered hole. Then you had special oval tapered washers with a hole drilled off center. Flip the washer one way it fit 4.5 on 5, the other way it fit 5 on 5. Then your reular nuts fit down over the whole thing. THe set I saw was well used and the tapered oval holes on the rim showed signs of the washer moving inside the hole. Wouldn't recommend it.