riverfever
NAXJA Forum User
- Location
- Woodland Park, Colorado
I put a BB on the 01 months ago that consisted of shackles and spacers. When I test drove it after the install, it did have some very mild vibes. My 96 gets driven the most so I never dealt with it until this rainy day. I measured the driveline angles. TC output was 5 degrees and the pinion was 12 degrees. With no SYE and CV, I know I want those 2 angles parallel. I had a TC drop kit and 6 degree shims. I opted to go with the shims. I out them in and re-measured the angles and was almost dead nuts on. Test drove it and the vobes were horrible. I'll go back tomorrow morning and do the TC drop. I'm not crazy worried about this but my question is this:
The numbers don't lie. According to my results...the current configuration should work. I only ask this b/c there have been times when a new forum user has asked a question with this same scenario. I know I've answered several threads dealing with this. In no way am I ever trying to be a d!ck when I tell them that we need to know the angles. I always try to be polite. BUT...if I was a noob with these angles....I'd be a little curious. Any thoughts?
-river
The numbers don't lie. According to my results...the current configuration should work. I only ask this b/c there have been times when a new forum user has asked a question with this same scenario. I know I've answered several threads dealing with this. In no way am I ever trying to be a d!ck when I tell them that we need to know the angles. I always try to be polite. BUT...if I was a noob with these angles....I'd be a little curious. Any thoughts?
-river