Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to the new NAXJA Forum!
If your password does not work, please use "Forgot your password?" link on the log-in page.
Please feel free to reach out to [email protected] if we can provide any assistance.
I'm going to regear to 4.56's soon and I'm curious if I need standard or reverse rotation gears for the D30 and what I need for the 8.25 I have in the rear.
I’m also going to regear, for the front I have a hi-pinion so I’m getting reverse cut gears. For the rear are standard cut. On a 98 D30-8.25 4.56 gearing.
I'm going to regear to 4.56's soon and I'm curious if I need standard or reverse rotation gears for the D30 and what I need for the 8.25 I have in the rear.
Im guessing you have an 01 XJ.
If thats the case, you have a low pinion D30 and will require a standard cut gear set.
Unless you have a four cyl. XJ, you will also need to get a carrier for the lower gear sets for the D30.
The 8.25 wont need a new carrier and I dont think they make a high pinion 8.25 so thats pretty simple.