cruiser54
NAXJA Forum User
- Location
- Prescott, Az
Is there a diagram somewhere of all the possible spray points?
No. All around the intake manifold and where it meets the head. All the fittings on the intake manifold.
Is there a diagram somewhere of all the possible spray points?
No. All around the intake manifold and where it meets the head. All the fittings on the intake manifold.
All of the bolts on the top of the manifold have been tightened. Solved about 95% of the problem (so far, still need to drive it home and see what happens on that trip).
I will get to the bottom ones this weekend at home. What's weird is there was NO NOISE whatsoever for a leak that size.
Note from DJ
Torque Values for 1990 XJ & MJ Manifold
Information from Kelley’s Works in Progress
Combination Manifold Inner Screws/Nuts, 3/8"-16 x 1¼" @ 30 pound-feet
Combination Manifold Outer Nuts, 3/8"-16 @ 23 pound-feet
If one could reach them with PB Blaster first, it might do a better job if the threads are rusted and dirty.
If one could reach them with PB Blaster first, it might do a better job if the threads are rusted and dirty.
Could the low voltage on the cps cause loss of power and instant gain of power again?