Xhavier_5478
NAXJA Forum User
- Location
- Colorado Springs, CO
So I swapped Crown Vic brakes onto my Dana 44 rear axle and it went together fine, but I noticed that it was hesitating from a stop and then all of a sudden would let loose, so I put the rear on jack stands and pulled the wheels off and the passenger side in drive is rubbing enough to stop it and pushing all power to the drivers side wheel, so I engaged the locker and got both rotors spinning and this is what they looked like..
Passenger side,
https://flic.kr/p/oxPEj8
Drivers side,
https://flic.kr/p/oxPqox
So whats bent, the rotors were on with three lug nuts each, and tightened in a star pattern.. the rotors have almost no miles on them..
Help me out where to start on this one..
Passenger side,
https://flic.kr/p/oxPEj8
Drivers side,
https://flic.kr/p/oxPqox
So whats bent, the rotors were on with three lug nuts each, and tightened in a star pattern.. the rotors have almost no miles on them..
Help me out where to start on this one..