Boostwerks.com
NAXJA Forum User
- Location
- Colorado
Planning on keeping your XJ for a while? If so, our Ultimate Steering Brace will help keep your XJ crack free and tracking between the lines. :roll:
Steering Brace Assembly https://www.flickr.com/photos/150006253@N08/
- The Ultimate Brace utilizes a large 1 1/4" grease-able pillow block bearing to brace the steering box from those hard hits and high loads that off-roading entails. The Ultimate Brace effectively creates a truss between both Uni-Rails further stiffening the chassis. It is the constant pushing and pulling seen between the track bar and steering box that ultimately creates the all too common sheet metal cracks seen around the steering box and/or track bar mount. Combined with a good track bar brace, our steering brace not only effectively eliminates the stresses that leads to these cracks, but will also extend the life of the steering box by placing the sector shaft in double sheer.
IMG_1836 https://www.flickr.com/photos/150006253@N08/
- In an effort to provide the highest quality parts, the Ultimate Brace receives a 3 stage powder coating process. It goes through a hot phosphate dip to clean and etch the steel. Then it gets a high zinc primer coat to help adhesion and prevent rust from forming. Finally, it's coated in a durable black hammer tone finish that is easy to clean and will look great for years to come.
- We use a specially designed sector nut machined from high strength 1144 alloy steel to give the sector shaft the support it needs. It then get's a silver zinc and blue chromate finish to help prevent corrosion.
Sector Nut https://www.flickr.com/photos/150006253@N08/
- We also now offer the kit in a DIY raw parts version! Simply select the kit from the drop down menu. (Requires chassis fit-up and welding).
Click below to order and more information!
http://www.boostwerksengineering.com/The-Ultimate-XJ-Steering-Brace_p_8.html
:guitar:
Steering Brace Assembly https://www.flickr.com/photos/150006253@N08/
- The Ultimate Brace utilizes a large 1 1/4" grease-able pillow block bearing to brace the steering box from those hard hits and high loads that off-roading entails. The Ultimate Brace effectively creates a truss between both Uni-Rails further stiffening the chassis. It is the constant pushing and pulling seen between the track bar and steering box that ultimately creates the all too common sheet metal cracks seen around the steering box and/or track bar mount. Combined with a good track bar brace, our steering brace not only effectively eliminates the stresses that leads to these cracks, but will also extend the life of the steering box by placing the sector shaft in double sheer.
IMG_1836 https://www.flickr.com/photos/150006253@N08/
- In an effort to provide the highest quality parts, the Ultimate Brace receives a 3 stage powder coating process. It goes through a hot phosphate dip to clean and etch the steel. Then it gets a high zinc primer coat to help adhesion and prevent rust from forming. Finally, it's coated in a durable black hammer tone finish that is easy to clean and will look great for years to come.
- We use a specially designed sector nut machined from high strength 1144 alloy steel to give the sector shaft the support it needs. It then get's a silver zinc and blue chromate finish to help prevent corrosion.
Sector Nut https://www.flickr.com/photos/150006253@N08/
- We also now offer the kit in a DIY raw parts version! Simply select the kit from the drop down menu. (Requires chassis fit-up and welding).
Click below to order and more information!
http://www.boostwerksengineering.com/The-Ultimate-XJ-Steering-Brace_p_8.html
:guitar: