99XJLove
NAXJA Forum User
- Location
- Grand Junction, CO
Okay so now my jeep is making a moaning rumbling type noise from the front end. I thought that maybe my alignment was off so I had it re-aligned. I know for sure that I need new ball joints and wheel bearings. Could either one of those be causing my rumbling noise? Then they guy at the alignment shop told me to just replace my passenger upper and bring it back in to see if I would need an offset ball joint on the other upper. I feel that if I were to replace all 4 with stock replacements then it should be fine right?
I was looking at wheel bearings from NAPA. What is the difference between these 2 different types? I know there is a $40 difference but other than that what is there?
http://www.napaonline.com/masterpag...r=BR930219&Description=Hub+Assy+-+Front+Wheel
http://www.napaonline.com/masterpag...r=BR930014&Description=Hub+Assy+-+Front+Wheel
As far a ball joints go would these ones be okay.
http://www.quadratec.com/products/56100_00.htm
I don't do much rock crawling, just a little trail riding with the ocasional boulders in the way. I am also planning on going to 33" BFG M/T but this is going to put a delay in it. Please help me if you have any imput at all thanks.
I was looking at wheel bearings from NAPA. What is the difference between these 2 different types? I know there is a $40 difference but other than that what is there?
http://www.napaonline.com/masterpag...r=BR930219&Description=Hub+Assy+-+Front+Wheel
http://www.napaonline.com/masterpag...r=BR930014&Description=Hub+Assy+-+Front+Wheel
As far a ball joints go would these ones be okay.
http://www.quadratec.com/products/56100_00.htm
I don't do much rock crawling, just a little trail riding with the ocasional boulders in the way. I am also planning on going to 33" BFG M/T but this is going to put a delay in it. Please help me if you have any imput at all thanks.