Search results

I need to have my front axleshaft u-joints replaced and seals done. I know I could do it myself over a weekend or something, but I am busy with work and I would consider dropping it off somewhere to have it done. Does anybody know any reputable shops for this in the Grand Rapids, MI area? Or...

Swamper TrXus Mud Terrain in a 34 x 12.5 x 15. I have 6 so one to spare for somebody. Good shape, normal wear, some chips in the lugs, but nothign major. Would make a great spare if you run 34's. About 40% tread left. I am located near Grand Rapids, MI. $75.

Summitracing.com part #DCC-4529885. These are mopar performance roller-rockers for a 4.0 at what seems to be a very resonable price. Is this the real deal?

I have just recently joined the cracked 0331 head club. I have a 2001 Xj with 85,000 miles. It sounds like I made it longer than most. I picked up a head a while back for next to nothing. Its a '95 I belive (7120 casting) and it has been cleaned and checked by a machine shop, so I am good to...

I have a set of "used" rear shocks. They are the rusty's hydros that are for 6" of lift. I have relocated shock mounts on my axle and these were just a bit too long. They were put on and driven for about road 100 miles. I checked the flex on them as soon as the weekend hit, and they are too...

I have a used Dana 30 Ring & Pinion gearset. They came from a low-pinion dana 30 front out of a 2001 jeep cherokee. They have about 45,000 miles on them. Would make a great spare set or replacement. No abnormal wear or broken teeth. $10 + shipping. Can arrange pickup in the Grand Rapids...

This is a mopar roof ski rack. Mounts to the factor roof rack rails, and has a lock & key for security. This was purchased brand new quite a few years ago and never installed. It is still brand new. I am cleaning out the pole barn. This used to retail for $180 from the dealership. $80+...

My AC compressor switch appears to be hyperactive. When idling cold, the AC compressor will switch on every 15 seconds or so, run for 5 seconds, then switch back off. The sensor & divider near the AC tank constantly ticks. Not sure whats going on, but it seems like my AC compressor is working...

Does anybody know a company that will make custom serpentine belts to specified lenghts? Seems like they would just take a lenght of the proper sized belt (# of grooves, width, etc) and splice it to length. Anybody know a company that does this?

Does anybody know of a reputable shop to do a coil spring install in/near west michigan? I have a set of longer coils I want installed to replace my coil/spacer combination, and I dont trust my cheapo spring compressors to do the job. I also dont have time to mess with it. Any ideas? I...

Does anybody know who makes an affordable diff gaurd for the 8.8? All I can find are the full cast covers (crane type) for $120-$150. I am looking for the $60 version (welded bars/rock ring style).

is there a bumper up there?

I am currently running about 5.5" on my '01 XJ. I didnt have all my parts when doing the lift, and it is currently setting on an old set of LCA's (from previous lift) and stock UCA's. I have a Teraflex long arm upgrade and a set of adjustable UCA's. I know if I were just swapping in the...

The mutt lift (RE, Rustys, Teraflex, homebrew) is going on tonight/tomorrow. I think I have built one heck of a set-up for cheap. Whadahya think: Front: RE 4.5" coils Ebay poly spacers (1") Custom built adjustable UCA's Teraflex Long Arm upgrade JKS discos RE Drop pit arm Rusty's HD adjustable...

I am regearing, going to 4.10's. I have a '01 XJ, D30 front, so its a "standard cut" low pinion. Is this the same front as TJ's? Most places dont list XJ's on the vehicle list. Will a yukon gearset #YG D30S- 411TJ work for me? I was going to order new gears for the front this week, but I...

-Accidetally posted this in modified, tech....hopefully I get a better response here! I picked up a couple of '92 heads in great shape for a port/polish project for my XJ. Problem is, I have a 2001 (different intake, exhaust, ignition, etc). I know the 96-98 heads have a different port for the...

I picked up a couple of '92 heads in great shape for a port/polish project for my XJ. Problem is, I have a 2001 (different intake, exhaust, ignition, etc). I know the 96-98 heads have a different port for the coolant temp gauge sending unit, but I dont know enough about the later model's...

I have some 1.25" DOM, 0.38" wall chromolly that would be perfect for a HD Tie rod. I am cut to length and ready to tap the ends, but I want to make sure I tap them correctly. Stock tie rods (2001) are 11/16-18 threads, right? One LH, one RH. I work at a machine shop and have the taps, I...

I am planning to go from 31's to 33's and adding lockers F & R. I have a 30 up front and a 29-spline 8.25 in the back. Is it worth upgrading the rear to an XJ-44 or Explorer 8.8? Axles for the 44 are 1.31" 30-spline, but the 8.25 is 1.21" 29-spline. The axle tubes are larger on the c8.25...

I have been doing some part time work that happened to pay rediculously well, so I have decided to make my jeep what I have always wanted, so here is a wishlist with approximate prices. I am in Byron Center, MI 49315, so local is good. Prices are to my door, make me an offer. D30 & C8.25 Diff...