Recent content by beatassXJ

Na, but the kid who t-boned me looked like he did.., and what shocks might those be? Im not familiar with em unless you mean those ones you slip over the end..

I havent been on here in a while and never in this section (i hope ZJ's are ok, i saw one..) so, Hi. Im Pat, im 20, and i used to have a 96 Xj, but i totalled it:guitar:...so i found a 98 ZJ that needed some easy mech work (expensive at a shop) that the owner could not sell. He needed a new carb...

It looks like a BPI fab kinda with the sides like that. but with a custom hoop maybe?

ok now the other side one is stuck, got the nut off but the metal sleeve in the bushing im pretty sure is rusted soild to the bolt not allowing it to be removed. the only reason i dont cut it out is the cams on the bolt. how inportant are these cams? can i go without them?

Broke 2 nut splitters, one 21mm deep impact socket, and went through 3/4 of a tank mapp/oxy.....finally got the basterd out. Thanks guys.

I am trying to install new LCAs on a 98 grand, (same front susp as an xj) and the gottamn driver axle side lca nut is frozen solid. ive had it glowing orange a bunch of times then hit it with multiple oils and waxs and had 550ftlbs on it for 10 minutes at a time...im stumped. Id just cut it but...

Look for a guy that calls himself Overlandxj. He runs 33-10.5s, on a little more lift i think but he could give you a sound answer.

So i guess im gonna get some Hd offroad engineering stiffiners and have a local guy burn em in. Two questions though, 1. Will i still need to use my Jcr frame extension plates with this upgrade? and 2. while im at it i need to do a trakbar and bracket. I dont wanna spend more than 200 but kinda...

Hey guys my name is Pat, im 20, and live in Davidsonville MD. Thats pretty close to annapolis and Balt. and DC. I am looking for a semi to just plain expeirienced welder/ jeeper that can take a look at and possibly weld a crack/ a unibody stiffiner to my frame (read...

Id love to do those, but i cant weld worth a shit. Ive practiced for a while but am nowhere near where id need to be to do those. So it needs to be somewhat simple fix where i can drive it to the shop and sit around for an hour or so while they weld it. I dont do alot of rocks and stuff but love...

I got myself a problem. Bout 1.5 years ago i kissed a tree doing about 40 on my passenger side, bent me up pretty good. I straightened it out pretty good and threw a JCR stage 3 bumper and their extended frame rail bracket things. Since then my dad totaled a Grand with my jeep, causing mine no...

How much for the 8.25? Interested.

If it was u-joints wouldnt it make the noise under all throttle conditions not just turning? and if it was unit bearings why would it only happen under throttle, seeing as im not in 4wd when it happens and no power is going to the front? Sorry for all the questions im just stumped.

Hey, I currently am the proud owner of a 1996 cherokee sport. It always makes its usual grunts and groans but about 3 days ago a new, more troubling sound emerged. i know noises are hard to diagnose through a comp but any hints are appreciated. It is the very similar to the sound of (close your...

Hello all, I recently purchased two new bfg AT's for my jeep. I discovered the joys of a shitty alignment and next to no tire rotations...so anyway..Which tires wear more? front or back? Dont wanna put the oldies where theyll wear faster. Thanks guys.