Hey fellas,
I am in the process of buying the final components for my exhaust. I am replacing everything from the front exhaust pipe, cat, and tailpipe.
Magnaflow cat for my 2001 xj rear cat
https://www.amazon.com/MagnaFlow-51205-Universal-Catalytic-Converter/dp/B0086C16NE/ref=sr_1_1?crid=35IXYW5AIQGDE&keywords=magnaflow+51205&qid=1676237467&sprefix=magnaflow+51205%2Caps%2C101&sr=8-1
Flowmaster Super 44 with Madrel 2.5" inch tailpipe that I bought from performance-cure.com
https://performance-curve.com/84-01-jeep-cherokee-4-0-mandrel-bent-exhaust-w-flowmaster-super-44-muffler/
Adapter pipe
https://performance-curve.com/2-5-od-2-25-id-custom-exhaust-reducer-adapter-8942/
Mandrel Bent 2.25" front pipe
https://www.autozone.com/emission-control-and-exhaust/exhaust-pipe/p/brexhaust-exhaust-pipe-102-8920/150878_0_0
3 questions:
1).
-I need help finding:
*Gasket and end bolts that will fit the new front pipe at the header
*Gasket and end bolts for both sides of the new cat
*What clamps and how many will I need?
2.)
-The mandrel tailpipe that goes with the super 44 ends up being several inches short and ends under the truck instead of being flush with the rear bumper. There is about 8'' inches of missing pipe from the cat. So i need to buy a 2.5 extension pipe to cut and install in order to fill in the gap.
Would this work?
https://www.amazon.com/Walker-52356-Extension-Pipe/dp/B001AGP5WQ/ref=sr_1_1?crid=29FXWOPNLHY8M&keywords=walker+52356&qid=1676237256&sprefix=walker+52356%2Caps%2C338&sr=8-1
3.) What kind of hangers and how many should I use?
4.) Is anything else i am missing here?
I am in the process of buying the final components for my exhaust. I am replacing everything from the front exhaust pipe, cat, and tailpipe.
Magnaflow cat for my 2001 xj rear cat
https://www.amazon.com/MagnaFlow-51205-Universal-Catalytic-Converter/dp/B0086C16NE/ref=sr_1_1?crid=35IXYW5AIQGDE&keywords=magnaflow+51205&qid=1676237467&sprefix=magnaflow+51205%2Caps%2C101&sr=8-1
Flowmaster Super 44 with Madrel 2.5" inch tailpipe that I bought from performance-cure.com
https://performance-curve.com/84-01-jeep-cherokee-4-0-mandrel-bent-exhaust-w-flowmaster-super-44-muffler/
Adapter pipe
https://performance-curve.com/2-5-od-2-25-id-custom-exhaust-reducer-adapter-8942/
Mandrel Bent 2.25" front pipe
https://www.autozone.com/emission-control-and-exhaust/exhaust-pipe/p/brexhaust-exhaust-pipe-102-8920/150878_0_0
3 questions:
1).
-I need help finding:
*Gasket and end bolts that will fit the new front pipe at the header
*Gasket and end bolts for both sides of the new cat
*What clamps and how many will I need?
2.)
-The mandrel tailpipe that goes with the super 44 ends up being several inches short and ends under the truck instead of being flush with the rear bumper. There is about 8'' inches of missing pipe from the cat. So i need to buy a 2.5 extension pipe to cut and install in order to fill in the gap.
Would this work?
https://www.amazon.com/Walker-52356-Extension-Pipe/dp/B001AGP5WQ/ref=sr_1_1?crid=29FXWOPNLHY8M&keywords=walker+52356&qid=1676237256&sprefix=walker+52356%2Caps%2C338&sr=8-1
3.) What kind of hangers and how many should I use?
4.) Is anything else i am missing here?